Safety And Instructional Decals - Toro 38587 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
Order part no. 108-4928
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—stop the
engine before leaving the
machine.
3. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
4. Engine switch On
94-2577
110-9398
5. Engine switch Off
6. Primer
7. Push the primer twice to
prime the engine.
8. Plug the machine in to
power the electric starter.
Order part no. 114-3752
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, rotor blades—stop
the engine before leaving
the machine.
3. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
4. Engine switch On
1. Cutting dismemberment hazards, impeller and auger—do
not place your hand in the chute; remove the ignition key
and read the instructions before servicing or performing
maintenance.
4
114-1707
5. Engine switch Off
6. Primer
7. Push the primer twice to
prime the engine.
115-5660