Av Compu Link Remote Control System - JVC RX-8000VBK Instructions Manual

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)
through the receiver.
To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the
procedure on the next page.
CONNECTIONS 1:
VCR 1
VHS
AV
COMPU LINK
IMPORTANT:
Connect to the terminal indicated in the
illustration.
DO NOT connect to the TV terminal.
CONNECTIONS 2:
CASE1: If the components are equipped with the S-video
terminals
VIDEO
VIDEO S-VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 1
MONITOR
OUT
CASE3: If only the VCR is equipped with the S-video
terminal
TV
VIDEO
VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 1
MONITOR
OUT
To Video input 2
44
DVD player
DVD
AV
COMPU LINK
AV
COMPU LINK
DO NOT use these video terminals.
DVD player
DVD
VCR
S-VHS
DO NOT use these video terminals.
DVD player
S-VIDEO
DVD
VCR
S-VHS
TV
If the AV COMPU LINK terminal
on the TV is "RECEIVER/AMP"
AV
COMPU LINK
RECEIVER/AMP
RECEIVER/
EX AMP
(VCR)
If the AV COMPU LINK terminal
on the TV is "AV COMPU LINK
EX"
AV
COMPU LINK EX
CASE2: If the components are not equipped with the S-
video terminals
DO NOT use these video terminals.
DVD player
DVD
VCR
VHS
CASE4: If only the DVD player is equipped with the S-video
terminal
DO NOT use these video terminals.
DVD player
DVD
VCR
VHS
CAUTION:
The AV COMPU LINK remote
control system cannot control the
DBS tuner connected to the TV
SOUND/DBS jacks, and video
components connected to the
VIDEO and CDR/VCR 2 jacks on
the receiver.
Notes:
• When connecting only the
VCR 1 or DVD player to this
receiver, connect it directly to
the receiver using cable with
the monaural mini-plugs.
• Refer also to the manuals
supplied with your video
components.
TV
VIDEO
VIDEO S-VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 2
MONITOR
OUT
TV
VIDEO
VIDEO S-VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 2
MONITOR
OUT
To Video input 1