JVC RX-8000VBK Instructions Manual page 32

For the other DSP modes
On the front panel:
1. Press DSP MODE repeatedly until
the mode you want appears on the
display.
• Each time you press the button, the DSP
modes change. (See page 24 for more
details.)
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software encoded with Dolby Surround and labeled with
mark.
DOLBY SURROUND
To cancel the DSP mode
Press DSP MODE repeatedly until "DSP OFF"
appears on the display.
From the remote control:
1. Press SURROUND MODE
repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP
modes change.
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software encoded with Dolby Surround and labeled with
mark.
DOLBY SURROUND
To cancel the DSP mode
Press SURROUND MODE repeatedly until
"DSP OFF" appears on the display.
30
––––––––––––––– MEMO –––––––––––––––
Use this column to write down your DSP mode adjustments for
DSP MODE
your future reference.
DSP MODE
SURROUND
MODE
SURROUND
MODE