Description; Features - HIKVISION DS-6300DI-T User Manual

User Manual of DS-6300DI-T Decoder

1.1 Description

Designed for the video monitoring system, DS-6300DI-T Series Video/Audio Decoder is developed on the basis of
TI platform, Linux operating system and Netra processor, ensuring high reliability and stability of system running.
DS-6300DI-T Series Video/Audio Decoder is capable of decoding video at 720P resolution and outputting decoded
video via BNC, VGA interfaces, and it also supports multiple network protocols and multiple stream transmission
mode. The decoded video can be displayed on video wall.

1.2 Features

Decoding Video and Audio
Private H.264, standard H.264, MPEG2 and MPEG4 video stream formats are supported.
Support PS, RTP and private customized data encapsulation formats.
PAL and NTSC image standards supported.
Decode video stream at resolution of 720P, SVGA, VGA, 4CIF, DCIF, 2CIF, CIF and QCIF.
G.722, G.711A, G.711U and ACC audio stream formats are supported..
Support of obtaining stream and decoding by URL method.
Video output via VGA connector or BNC connector.
Decoding Capacity
Refer to the following table for the decoding capacity of different models:
Resolution
Model
DS-6304DI-T
DS-6308DI-T
DS-6316DI-T
Decoding Mode
Dynamic decoding: log on the remote encoder or remote stream media server to select a channel of video
source to acquire video stream, and then decode and output the video for local display.
Cycle decoding: set multiple remote monitoring channels on a decoding channel, and the decoder is capable of
performing cycle decoding according to the configured sequence and time. The stream sources can be obtained
via remote access to the encoder or stream media server and decoded for local output. A maximum of 64
channels are allowed for cycle decoding.
Obtain stream from stream media server: The decoder can receive real-time data by access to stream media
server, and then decode the video stream and output them on the video wall. The private RTSP is adopted as the
control protocol, and the TCP/UDP is used for receiving the data stream.
Remote playback of record files: by remote access to the encoding devices with storage capability, and directly
obtain the record files from the encoder, and finally decode for local output.
Network
One 10/100/1000Mbps self-adaptive Ethernet interface.
Support TCP, UDP and Multicast network protocols.
Resolution
720P 4CIF
4 channels 8 channels
8 channels 16 channels
16 channels 32 channels
7
Video Output
QCIF/CIF
4 BNC and 2
16 channels
VGA outputs
8 BNC and 4
32 channels
VGA outputs
16 BNC and 4
64 channels
VGA outputs
Window-
division Mode
1/4/9/16
1/4/9/16
1/4/9/16