EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
5.2.2 Updating firmware
This section explains how to update the firmwares.
Controller firmware
Engine controller firmware
OUTLINE
Unit
Data format
Controller
RCC
CRB
Engine Controller
XE
First use the RCC file to update the controller firmware. Only when
the update using the RCC file is failed, use the CRB file.
TOOL
Firmware update is executed by transmitting data for updating the program from the
computer via USB using the exclusive software tool. Make sure to use the software
tool described below.
Tool Name: Firmware Update Tool
ADJUSTMENT
Operation
Panel operation
Tool
Not required
Required
Required
Required
Required
Required
Adjustment
Revision B
145
Confidential