EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
5.1 Adjustment Item
The table below shows the adjustment item (including life counter clear) required when the specified part/unit is fixed or replaced.
Part/Unit
Timing
Main Board Assy.
After replaced
with a new one
As needed
As needed
ADJUSTMENT
Item
Writing of USB-ID
Execute the item using the dedicated program.
Updating of controller
Execute the item using the dedicated program.
firmware
Updating of engine controller
Execute the item using the dedicated program.
firmware
Adjustment Item
Adjustment Procedure
Revision B
Required Jig & Tool
Reference
EPSON Page Printer Main Board
Page 142
Initialization Tool
Firmware Update Tool
Page 145
Firmware Update Tool
Confidential
141