Epson AcuLaser M2000D Service Manual page 121

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
Right Side
Clamp
B
Connector Guide Pin
Main Board Assy
2. Disconnect the connector from the Main Board Assy, and release the cable from the Clamp.
3. Remove the two screws.
B) Silver / M3x10 / P-Tite: Two pieces
4. Pull out the guide pin of the Paper Eject Unit from the hole.
DISASSEMBLY AND ASSEMBLY
B
Paper Eject Unit
Main Unit Disassembly/Reassembly
Left Side
Paper Eject Unit
5. Remove the two screws.
B)Silver / M3x10 / P-Tite: Two pieces
6. Pull out the guide pin of the Paper Eject Unit from the hole, and remove the Paper Eject
Unit.
Revision B
B
Guide Pin
B
112
Confidential