Epson AcuLaser M2000D Service Manual page 152

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
WRITING METHOD
USB ID
The method of writing USB ID differs according to the condition of the main board. Referring to the following table, figure out what to do depending on the
condition. For the operational procedure, follow the instructions shown by the program.
Condition of Main Board
Communication between PC and the Main
Board. is impossible.
Communication between PC and the Main
Board is possible.
Store optional ID
ADJUSTMENT
Table 5-1. Writing Method
Check of the previous ID
The previous ID can be confirmed by a status sheet
or any other sheet that has already been printed out.
There is no way to confirm the previous ID.
(The previous ID can be retrieved from the
previous Main Board)
Store auto-generated NEW ID
Writing method
(button name)
Store optional ID Enter the previous ID to write it to the new Main Board.
Store auto- The program automatically creates the new ID from the serial number of the
generated NEW ID printer and write it into the new Main Board.
OLD ID Retrieval/ Retrieve the ID from the old board, and then enter the retrieved ID into the new
Restore board.
Adjustment
Revision B
Description
OLD ID Retrieval/Restore
Confidential
143