Dubbing Tapes; Recording Disc-Disc Synchronized Recording - JVC LVT1370-001A Instructions Manual

Dubbing Tapes

On the unit ONLY:
1
Press TAPE.
2
Put the source cassette into the deck B, and a
recordable cassette into the deck A.
3
Press PAUSE 8, then press REC ¶ for the
deck A.
PAUSE
4
Press PLAY 3 for the deck B.
Dubbing starts.
To stop during dubbing, press STOP/EJECT 7/0 for the
deck A and B.
When the TV is connected to this unit
Noise will be heard while dubbing. Disconnect the TV from the unit.
TAPE
REC
– 24 –
Recording Disc
—Disc Synchronized Recording
You can start disc play and recording at the same time.
On the unit ONLY:
1
Put a recordable cassette into the deck A with
the exposed part of the tape down.
• See also page 22.
2
Close the cassette holder gently.
3
Press CD to select the disc player as the
source.
• If you want to record tracks in the desired order,
program the playing order (see page 17).
4
Press REC ¶.
The disc playback and recording start automatically.
The CD SYNC indicator appears on the display.
• If you press REC ¶ while playing back the
disc, recording starts from the time you press REC ¶.
• When the tape is reached at its end, recording stops
and the disc playback is paused. To record the
succeeding tracks, turn over the cassette (or put
another cassette), then press REC ¶.
• When disc playback ends, press STOP/EJECT 7/0 to
stop the recording.
You cannot press REC ¶ in the following cases:
• If no cassette is inserted.
• If a protected tape is inserted.
To stop recording for a moment, press PAUSE 8.
The recording is paused, but the disc playback does
not stop.
To resume recording, press PAUSE 8 again.
To stop recording, press STOP/EJECT 7/0.
The recording stops and the disc playback is
paused.
To remove the cassette, press STOP/EJECT 7/0
while recording is stopped.
REC
PAUSE
STOP/EJECT
STOP/EJECT