Playing Back Tapes; Regular Play; Reverse Mode - JVC RV-NB10W Instructions Manual

I Playing back tapes
f
cp (D CD_
_
--TAPE <
144-
REVERSE
--I_
MODE
LOCK/RELEASE
TAPE <
With automatic tape direction, you can listen to type I or II tapes
without having to change any settings.
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes easily
jam in the pinch-rollers and the capstans.
_Tu,n the LOCK/RELEASE knob
counterc|ockwise to open the cassette
holder,
tho cassotto in,withthosiao yo.want
to listen to facing you,
5|f you nee(] to change the p|ayback
direction,
press TAPE < _.
The opposite side tape direction indicator lights up and the tape
playback direction changes.
To stop playing, press i
To remove the tape, stop the tape, and open tile cassette
holder by turning the LOCK/RELEASE knob to the
"RELEASE" position.
Notes:
* Do not turn the LOCK/RELEASE knob dtlring playback.
* When no tape is loaded in the deck, "NO TAPE" appears on the
display.
To fast-wind/rewind a tape
Press _i or i<< to fast-wind/rewind the tape.
. The cassette deck automatically stops when the tape reaches its
end.
tho hoiaor gont|yanat.rn tho knob
to "LOCK" position,
Pross TAPE _ _.
The tape is played in the direction shown by tile tape direction
indicator.
_,-(Forward playback):The side ofthe tapefi_cing you is
played back.
<(Reverse playback): The opposite side of the tape is
played back.
You can set a tape to play just one side, both sides in succession, or
both sides continuously.
Using the reewete central only
Press REVERSE MODE.
Each time you press the button, reverse mode indicator changes as
l\_llowrs:
___ "-_ _,_) "-_ (_) "-_ (back to the beginning)
"-"" The cassette deck automatically stops after playing
* 4,,--"
one side of the tape.
* _.) : The cassette deck automatically stops when playback
in the reverse (_1) direction is finished.
= (_) : The cassette deck continues to play both sides of the
tape until the [] button is pressed.
13