Table of Contents
Advertisement
Repeat play (using the remote control unit)
Press the REPEAT button before or during play. A single track or all the
tracks can be repeated.
Whether a single track or all tracks are to be repeated can be specified.
Each time the REPEAT button is pressed, the mode will change from
single track (
), to all tracks (
REPEAT
Single track
÷ Single track repeat (
)
The current or specified track will be played repeatedly.
÷ All tracks repeat (
ALL)
All tracks or the programmed tracks of a CD will be played repeatedly.
HANDLING CASSETTE TAPES
Cassette tapes
1. Loose tape may cause trouble. Using a pencil or similar object, gently
tighten the tape as shown.
2. To prevent recordings from being erased accidentally, remove the
tab(s) with a screwdriver, etc. Reseal the slots with adhesive tape to
erase and re-record after the tabs have been removed.
3. C-120 cassettes are not recommended because they are prone to
malfunction.
Turn the pencil to tighten the tape.
Note:
If the power is switched off while a tape is running, it may be impossible
to remove the cassette. If this happens, switch the power on again before
attempting to remove the cassette.
Auto tape select mechanism
This unit has an Auto Tape Select mechanism which distinguishes between
different types of tape using detection holes in the cassette. After the
type of tape has been detected, bias and equalization suitable for the
tape are set.
÷ Cassettes with detection holes:
Metal tape (EQ: 70 µs) .................... Type IV
CrO
(chrome) tape (EQ: 70 µs) ..... Type II
2
÷ Cassettes without detection holes:
Normal tape (EQ: 120 µs) ............... Type I
16
ALL), to clear mode, in this order.
ALL
Goes off.
All tracks
Repeat playback is released.
Side "B"
Tab "B"
Random play (using the remote control unit)
Press the RANDOM button.
"RANDOM" appears in the display window. After all tracks are played
back once in random order, playback stops and random play is released.
Note:
Move the unit as far away possible from a TV or other radio set. Otherwise,
the CD playback sound will be degraded or the TV picture may be
distorted.
Cassette loading
1. Turn the OPEN knob to the left to open the cassette holder.
2. Insert a cassette tape as shown on the next page.
3. Close the cassette holder.
Side "A"
Tab "A"
Adhesive tape
RANDOM
Metal/CrO
tape detection holes
2
Hide quick links:
Advertisement
Table of Contents
