Full Length Indicators; Abbreviated Indicators - Ericsson EDACS MDX Operator's Manual

or left of the display (PC programmable). It is separated from the normal
information with an indicator such as an asterisk ("*").

Full Length Indicators

**INDV**
ID#####
PHN CALL
DATACALL
*NO DATA
* NC *
ALL CALL
*AGENCY*
*FLEET*
EMERGNCY
BOOT DSP
LOAD KEY

Abbreviated Indicators

F*
Displayed when your unit receives an individual
call from another unit.
If programmed, displayed when your unit receives
an individual call where ##### is the unit ID of the
calling radio. (Note: If the ID is in your Special
Call list, you may choose to show an 8 character
name instead of the number.)
Displayed when your radio receives a telephone
call from the trunked system.
Displayed when your radio is involved in a data
call.
Displayed when your radio is in the data disabled
state.
Displayed when no control channel is found on a
trunked system.
Displayed when receiving a system wide call.
Displayed when receiving an Agency Call.
Displayed when receiving a Fleet Call.
Displayed steady when operator declares an emer-
gency (optional), flashes when another user de-
clares an emergency.
Displayed at power on in radios equipped for Aegis
operation. Indicates initialization of Digital Voice
Module.
Displayed when VGE encryption keys are being
uploaded to the Digital Voice Module.
Displayed on radios defined in the PC programmer
as supervisory when the trunked system is in fail-
soft mode. (Note: In failsoft mode, trunked dis-
patch operations is fully operational but
interconnect may not be possible.)
15