Home/Emergency; Special Call; Indicators - Ericsson EDACS Monogram Series Operator's Manual

HOME/EMERGENCY

SPECIAL CALL

INDICATORS

The seven character alphanumeric display identifies the selected
System/Group and operating modes or error conditions. There are also 11
status indicators to indicate radio or system status.
SYS The System display indicates the number of the current
EDACS, GE-MARC or Conventional system selected.
GRP
The Group display indicates the number of the current Group
in an EDACS or GE-MARC System.
LOCK This indicator will only be present when the optional DTMF
microphone is used. When displayed, the keypad is locked on
the DTMF microphone to prevent accidental transmission of
tones by pressing of any of the keys on the keypad.
This button is used to automatically select a desired
Group and/or System by pressing and holding the key for
a programmed duration. This button may also be
programmed to function as an emergency button to
declare an emergency by pressing and holding for a
programmed duration. Emergency messages may only be
transmitted in EDACS systems. The button must be
programmed either for Home or Emergency, not both.
This button is used to place the radio in the Special Call
mode. From the Special Call mode, the radio is able to
make individual and interconnect calls in an EDACS or
GE-MARC system.
Figure 2 - LCD Display
11