Options; Type 99 Option; Additional Accessories (Options) - Ericsson EDACS MDX Operator's Manual

TYPE 99 OPTION

If the Type 99 Option is present, individual selective calling is possible.
Press the programmed Flex key or use the menu and GROUP/SEL keys to
enable the decoder option (Scan must be off). The LED display will show the
option status: "T99 ON" or "T99 OFF". Press the button a second time to
toggle the option status. The display will revert to normal channel display after
5 seconds. When a call is received, an alert tone will be heard and the display
will flash, alternately "T99" and the channel selected. After receiving the call,
press the CLR button to reset the decoder for the next call. The display will
stop flashing.
If a call was received and the display is flashing, the CLR button must
first be pushed before the T99 option may be disabled.
If the Horn Alert option is present with the Type 99 option, the radio can
beep the vehicle horn when a Type 99 call is received. This option permits
alerting persons out of the vehicle when a call is received. The Horn ON/OFF
switch which is mounted on or near the radio is used to turn off the horn beep
relay.

ADDITIONAL ACCESSORIES (OPTIONS)

The following equipment options are available for the MDX radio. Refer
to your local radio supplier for ordering information.
Option Description
PMAN1L 800 MHz roof mount antenna with TNC
connector
PMAN1M 900 MHz roof mount antenna with TNC
connector
PMAN1N 900 MHz glass mount antenna with TNC
connector
PMAN1P 900 MHz mag mount antenna with TNC
connector
PMAN1R VHF/UHF roof mount antenna with TNC
connector
48

OPTIONS

MDX Optional Accessories
Part Number
19B209568P5
19B801182P3
19B801182P5
19B801182P4
19B209568P6