How To Make Detailed Settings; Menu Map - Marantz NR1504 Owner's Manual

How to make detailed settings

Menu map

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Dialog Level
Subwoofer Level
Audio
Surr.Parameter
Tone
M-DAX
Audio Delay
Volume
Audyssey
Manual EQ
HDMI Setup
On Screen Disp.
Video
TV Format
Input Assign
Source Rename
Hide Sources
Inputs
Source Level
Input Select
Audyssey ® Setup
Manual Setup
Speakers
DVD
Description
Sets the output level to clarify the dialogue
output from the center channel.
This setting adjusts the volume level for the
subwoofer.
Adjusts surround sound parameters.
Adjusts the tonal quality of the sound.
Expands the low and high frequency components
of compressed audio content such as MP3 files
to enable richer audio playback.
Compensates for incorrect timing between video
and audio.
Set the MAIN ZONE (room where the unit is
located) volume setting.
Makes Audyssey MultEQ ® , Audyssey Dynamic
EQ ® and Audyssey Dynamic Volume ® settings.
Uses the graphic equalizer to adjust the tone of
each speaker.
Makes settings for HDMI video/audio output.
Select the on-screen display user interface
preferences.
Set the video output signal format for the TV you
are using.
Changes input connector assignment.
Changes the display name for this source.
Remove from the display input sources that are
not used.
Adjusts the playback level of the audio input.
Sets the audio input mode and decode mode.
The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
Perform when setting the speakers manually
or when changing settings made in Audyssey ®
Setup.
Page Setting items Detailed items
Information
94
IP Control
94
Network
Friendly Name
94
95
Settings
96
Diagnostics
Maintenance Mode
96
Language
96
Auto Standby
97
General
98
100
Front Display
101
Information
101
Usage Data
103
Firmware
105
105
Setup Lock
105
Perform the installation, connection, and setup procedures to prepare the
105
unit for operation following guidance from the setup section of this manual.
23
Setup
Assistant
107
89
Description
Display network information.
Enables network communication in standby
power mode.
The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
Make settings for wired LAN.
Used to check the network connection.
Use when receiving maintenance from a Marantz
service engineer or custom installer.
Sets the language for display the menu on the
TV screen.
When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, "Auto
Standby" is displayed on the display of this unit
and the menu screen.
Makes settings related to the display on this unit.
Show information about receiver settings, input
signals, etc.
Selects whether or not to send anonymous
usage data to Marantz.
Set whether or not to check for firmware update,
update the firmware, and display update and
upgrade notifications.
Protect settings from inadvertent changes.
Page
111
111
111
112
113
113
115
115
115
116
117
117
118
C 7