Assembly - Grill Chef 12739A Assembly And Operating Manual

Assembly

Before starting
Here are a few tips to help you assemble your barbecue quickly and successfully:
• Check that no parts are missing by placing all of the individual parts on an empty surface (we reserve the right to make
minor technical alterations, such as the content of the small parts bag).
If, despite careful factory checks, a component is missing, please contact our customer service department (see the last
page). We will immediately attend to your request.
• Sort out the small parts, as some of the screws and bolts, for example, are very similar and can be easily confused.
• For assembly you will need a medium size screwdriver and a suitable spanner (flat spanner or box spanner).
You will need a flat spanner (AF17) to connect the gas cylinder.
Only use tools that are intact and suitable for the job at hand. Worn or unsuitable tools will not allow you to tighten the
bolts sufficiently, but will damage them to the extent that they can no longer be turned.
• Always fit all connecting elements (screws, bolts, nuts, etc.) as shown in the following illustrations. If you misplace a
connecting element, replace this with an appropriate part. Only by doing this can you ensure that the construction is
strong and safe.
• It is essential that you follow the instructions in the order they are specified!
• Read the text for each step before carrying it out, as useful information is sometimes only provided at the end of the section.
Even if you are not experienced at DIY, assembly does not generally take more than one hour.
12 GRILLCHEF