Basic Operations And Settings; Setting The Clock - JVC GVT0182-005A Instructions Manual

Basic Operations and Settings

About this manual
In this manual, operations mainly using the
remote control are explained; however, some
buttons on the main unit work the same way
as those on the remote control. You can use
either button in this case.
Number
buttons

Setting the Clock

You can set the clock when the System is turned
either on or off.
1
Press .
• If you have already set the clock before and
you want to adjust it, press
show the clock setting display.
2
Press or
set the hour, then press
• You can also use the number buttons to
specify the hour. Refer to "Using the number
buttons" on the right column.
3
Press or
set the minutes, then press
• You can also use the number buttons to
specify the minutes. Refer to "Using the
number buttons" on the right column.
8
four times to
repeatedly to
.
repeatedly to
.
4
Press or
set the day of the week.
5
Press .
• "CLOCK SET!" appears on the display
window and the built-in clock starts working.
NOTE
• While setting the clock, you can return to the
previous step by pressing
• Holding down or
value rapidly.
■ To display the clock while using the System
Press .
• To return to the source display, press
NOTE
• The hour indication is displayed using the 24-hour
system.
• The clock will gain or lose approximately 1
minute per month.
• If the power cord has been unplugged or a power
failure occurs, you will have to set the clock
again.
Using the number buttons
Examples:
3:
13: → →
20: → →
→ →
123:
• 100 and above is used when you select an MP3
track.
repeatedly to
.
changes the setting
again.
→ →