Table of Contents
Advertisement
Basic Operations and Settings
Adjusting the Tone
NOTE
• Before adjusting, set the sound mode to "SOUND
MODE NORMAL" (
mode is set to any item other than "SOUND MODE
NORMAL" and you press
appears on the display window and you cannot
adjust the tone.
1
Press
repeatedly to display
"BASS" or "TREBLE."
: Adjusts the bass sound.
: Adjusts the treble sound.
2
While "BASS" or "TREBLE" is
displayed on the display window,
press
repeatedly to adjust the
tone.
• You can adjust the tone level within the
range of –5 to +5.
• The display returns to the source display in
a few seconds.
NOTE
• This function does not affect recording sound.
10
page 9). When the sound
, "NO OPERATE"
α
Sound
α
Sound
α
(alpha) waves are regarded as one type of
brain wave that is emitted when a person is
α
relaxed. JVC's
SOUND function is designed
to produce natural and comfortable sound that
makes you feel relaxed. The natural effect is
completed by
1) modulation which adds fluctuation with the
α
wave frequency to subtracted waves
(left-right indirect sound).
2) sound correction for covering the middle
range of waves in music signals which
naturally tend to dissipate.
Press
repeatedly.
• Each time you press
as follows:
: Produces a natural
: Produces a comfortable
: Produces a deeper
: Cancels α sound (initial
• When α sound is set to an item other than
"α SOUND OFF,"
window.
NOTE
• When the SOUND MODE is activated (
α
9), using
SOUND cancels the SOUND MODE
automatically and vice versa.
• This function does not affect recording sound.
, the display changes
sound.
sound.
sound.
setting).
lights on the display
page
Advertisement
Table of Contents
