Jeep Wrangler 2008 Owner's Manual page 186

2008 Jeep Wranger
10. Open the header latches and engage the hook on each
side onto the windshield loops (do not close the latches).
11. If the swing gate brackets were removed, install them
by hooking the rear edge of the bracket on the interior
side of the body channel. Then, rotate it rearward and
Downloaded from www.Manualslib.com manuals search engine
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185
over the channel until it snaps onto the exterior part of
the rail. To be properly located, the bracket must only be
clipped to the shortened rail edge.
12. Move to the rear of the vehicle and gently pull the sail
panels over the rear roof bow (4–bow).
Page Number: 186 of 466.
3