Lighting Instructions - Buderus Logamax plus GB162-80 kW Replacement Instructions Manual

For gas valve replacement
Hide thumbs Also See for Logamax plus GB162-80 kW:
Table of Contents

Advertisement

3
Gas valve replacement
3.6

Lighting Instructions

For your safety, read before lighting.
WARNING:
due to not follow these instructions.
B If you do not follow these instructions
exactly, a fire or explosion may result
causing property damage, personal injury
or loss of life.
B Follow these operating instructions.
DANGER:
What to do if you smell gas:
B No open fire! Do not smoke!
B Avoid formation of sparks! Do not touch
any electric switch, phone, electric plug or
bell!
B Shut off main gas supply.
B Open windows and doors!
B Notify all occupants!
B Leave the building!
B Immediately call your gas supplier, heating
contractor or fire department from a phone
outside the building!
A) This boiler is equipped with an ignition device which
automatically lights the pilot. Do not try to light the pilot by
hand.
B) Check for smell of gas around the boiler area.
Be sure to smell next to the floor because some gas is
heavier than air and will settle on the floor.
C) Do not use this boiler if any part has been under water.
Immediately call a qualified service technician to inspect
the boiler and to replace any part of the control system
and any gas control which has been under water.
10
Logamax plus GB162-80 kW/100 kW - We reserve the right to make any changes due to technical modifications!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents