Recording To A Vcr Or Digital Video Recorder - Canon VIXIA HV40 Instruction Manual

- - - - - - - - - - - - - - - - - - - - e . . . .
Connecting to a TV or VCR
I
- There will be no video or audio output from
the HDMI OUT terminal while there is a video
input connection to the HDV/DV terminal or the
AV/O terminal.
- To output audio dubbed later on a tape
through the HDMI OUT terminal, set [AUDIO
OUT] to [ttl MIXNAR]
(CD
43).
- Audio output from the HDMI OUT terminal will
include both channels (Left/Right on a stereo
recording, Main/Sub on a bilingual recording),
regardless of the [OUTPUT CH] setting.
Recording to a VCR or Digital Video
Recorder
You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device. When recording to a
digital video recorder using the HDV/DV
terminal, you can copy recordings with
virtually no generation loss in video and
sound quality.
Connect the camcorder to the external
device following one of the connection
diagrams shown in the previous section
Connection Diagrams
(CO 71).
(CO 12)
Change the following settings as
necessary before making the
connections. Refer to the corresponding
explanation of each setting in the
IE+ PLAY/OUT SETUP menu option list
(CD 42).
- [PLAYBACK STD] to select the output video
standard.
- [DV OUTPUT] to select the standard of the
output video when using connection type
fJ.
Note that the video standard of the recorded
copy depends also on the standards supported
by the external digital device. Refer to the table
below.
- Set [AV/PHONES] to [I
AV
I AV] when using
connection type
II.
Connecting
Connect the camcorder to a VCR or other
analog device using connection type
II.
or to a DVD recorder or other digital
recording device using connection type
fJ,
as shown in the previous section
Connection Diagrams (CD
71).
High
[HOV] [HOV)
[B AUTO] or
[1:I-Va·V'
HDV/DV]
Definition
[IHDVI HDV]
IHOV]
lov]
[B AUTO] or
[ffi!) DV LOCKED]
Standard
[IHDVI HDV]
Definition
[B AUTO] or
[1:I-lfa.Vj
HDV/DV] or
lovi
lov]
[ffi!) DV] [ffi!) DV LOCKED]
Settings for Recording Video Output using the HDV/DV Terminal
Standard of Standard Supported [PLAYBACK STDI '
Video Output the Recording by the External Setting
Signal on the Tape Digital Device*
[OVOUTPUT]
Setting
-
m
><
-
C D
""'I
~
l»
o
o
~
~
CD
(")
=
o
~
t/)
*
To output video in high definition verify that the DV terminal on the external digital device is
compatible with the MPEG2-TS protocol; to output video in standard definition, verify that it is
compatible with the DV standard.