Canon VIXIA HV40 Instruction Manual page 60

II
Still Image Recording Options ......- - - - - - - - - - - - - - - - - - -
In the [II FIREWORKS] recording program the
focus priority is automatically set to [ . OFF].
FUNC.
(CD
25)
FUNC.
[FUNC.]
¢
Icon of the currently selected
Drive Mode
POINTS TO CHECK
[FUNC.]
¢:II
Desired option
• The speed and maximum number of
continuous shots is as follows.
-
[~
CONTSHOOT]: Approx. 3 images/
second
- [
~
HISPEED CONTSHOOT]: Approx. 5
images/second
- Continuous Shooting with flash: Approx. 2.1
images/second
- Maximum number of shots: 60 still images
• These figures are approximate and vary with
the recording conditions and subjects.
• The actual number of images per second will
be lower when"
A"
(camcorder shake
warning) is displayed on the screen.
CONTINUOUS SHOOTINGI
HIGH-SPEED CONTINUOUS SHOOTING
1
Press
[PHOTO
I
halfway to activate
the autofocus.
2
Press
[PHOTO
I
fUlly and hold it
pressed down.
A
series of still images will be
recorded as long as you hold the
button pressed down.
AUTO EXPOSURE BRACKETING
Press
[PHOTOI,
first halfway to activate
the autofocus and then fully to record
the still image.
Three still images in different exposures
will be recorded on the memory card.
(llJ 12)
Captures a series of still images as long as
you hold [PHOTO] pressed down. For the
number of frames per second, refer to the
notes below.
The camcorder records a still image in
three different exposures (dark, normal,
light in
1/2
EV steps), allowing you to
choose the shot you like the best.
Mode switch: P (except for the
[IIFIREWORKS] recording program).
Options •
Default value
Continuous Shooting and Exposure
Bracketing
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose later
the picture you like the best.