Canon VIXIA HV40 Instruction Manual page 92

Memory Card Operation
Problem Solution
OJ
Memory card cannot be Memory card was not facing the correct direction. Turn the
22
inserted. memory card over and reinsert it.
Can not record on the memory Memory card is full. Erase still images to free some space or 69
card. replace the memory card.
Memory card was not initialized. Initialize the memory card. 70
The folder and file numbers have reached their maximum value. 42
Set [FILE NOS.] to [RESET] and insert a new memory card.
Memory card cannot be played Set the camcorder to
I:PtAY·'QIzl.
35
back.
Image cannot be erased. Image is protected. Cancel the protection. 69
u
01 " flashes in red.
Card error occurred. Turn off the camcorder. Remove and 70
reinsert the memory card. Initialize the memory card if flashing
persists.
Printing
Problem
The printer is not operating
even though the camcorder
and printer are correctly
connected.
Editing
Solution
Disconnect the USB cable and turn off the camcorder and the
printe(. After a short while, turn them on again, set the
camcorder to P'I!tAYicgj mode and restore the connection.
OJ
Problem
Solution OJ
Cannot record with this Set
[AV~
DV] to [OFF]. 42
camcorder video input from an
Wrong signal standard. Refer also to the instruction manual of -
external video device
the connected device.
connected to the HDV/DV
Dubbing may work using the AV/O terminal.
terminal using a DV cable.
Others
Problem
A rattling can be heard from the
camcorder.
Solution
The internal lens fixture can move when the camcorder is turned
off. This is not a malfunction.
OJ