Preparing The Camcorder; The Wireless Controller - Canon VIXIA HV40 Instruction Manual

- - - - - - - - - - - - - - - - - - - - - - - - - - - - e . . . .
Getting Started
II
-
. "
.,
CD
"C
D)
.,
D)
-
•
______________________J
• The wireless controller may not work properly
when the remote sensor is situated under
strong light sources or direct sunlight.
• If the wireless controller does not work, check
that [WL.REMOTE] is not set to [OFF (II~]
(OJ 46). Otherwise, replace the battery.
Point the controller at the camcorder's
remote sensor when you press the
buttons.
CD
NOTES
1
Press the tab in the direction of the
arrow and pull out the battery
holder.
2
Place the lithium button battery with
the
+
side facing up.
3
Insert the battery holder.
Using the Wireless Controller
Inserting the Battery
(Lithium Button Battery CR2025)
The Wireless Controller
1
Turn on the camcorder.
The lens cover will open automatically.
2
Adjust the viewfinder.
Keep the LCD panel closed to use the
viewfinder and adjust the dioptric
adjustment lever as necessary.
3
Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the START/STOP button
with your thumb.
Proper operation cannot be guaranteed for all
miniSD cards.
• Make sure to initialize all memory cards
before using them with this camcorder for the
first time (OJ 70).
• Memory cards have front and back sides that
are not interchangeable. Inserting a memory
card facing the wrong direction can cause a
malfunction of the camcorder.
Preparing the Camcorder
o
IMPORT~N_T
__' J