Canon VIXIA HV40 Instruction Manual page 44

II
Menu Options Lists •••••- - - - - - - - - - - - - - - - - - - - - -
[0!j
OV LOCKED], [1:1 ••
fn·VA
HDV/DV]
You can select the video standard to use
when connecting to an external device
using the HOV/OV terminal.
[1:I.vn·VA
HOV/DV]: Switch
automatically between standards to
match the original standard of the
recordings.
[0!j
DV LOCKED]: All video output will
be in DV standard (recordings made in
HDV will be down-converted).
• Select the [PLAYBACK STO] and [OV
OUTPUT] settings according to the
specifications you want to use for
playback on a high-definition TV Refer to
the table below.
[m!D
48Di]: To use the 48Di specification
(standard definition).
[ _ 1D8Di/48Di]: To use the full 1D8Di high
definition specification when possible, or
switch automatically to 48Di specification
when 1D8Di is not supported by the TV
• Select the [PLAYBACK STO] and
[COMP.OUT] settings according to the
specifications you want to use for
playback on a high-definition TV Refer to
the table below.
• When the playback standard selected is
different from that of the original recording,
no video will be output.
• This setting will be unavailable while
the camcorder is connected to an
external device using the HOMI cable.
I
DVOUTPUT
~I
Settings for Video Output from the COMPONENT OUT Terminal
Video Output
Standard of the
Recording on the
[PLAYBACKSTDJ Setting [COMP.OUT] setting
Signal
Tape
,
High [r.iJ AUTO] or [IHDVI HDV] [ _ 1080i/480i]
Definition
(1080i)
HDV
Standard [r.iJ AUTO] or [ IHDVI HDV]
[m!D
480i]
Definition
[r.iJ AUTO] or [
0!j
DV]
[ _ 1080i/480i] or [
m!D
480i]
(480i)
DV
Settings for Video Output from the HDVlDV Terminal
Video Output
Standard ofthe
Recordlogon the
[PLAYBACKSTD).Setting
IPV
OUTPUTl Setting
Signal
Tilpe
...
High
[r.iJ
AUTO] or [ IHDvl HDV]
[ 1:I·Vn.N
HDV/DV]
Definition
(1080i)
HDV
Standard
[r.iJ
AUTO] or [ IHDVI HDV]
[0!j
DV LOCKED]
Definition
[r.iJ
AUTO] or [
0!j
DV]
[ I:I.WA •• !J HDV/DV] or
(480i)
DV
[0!j
DV LOCKED]