Recording To A Vcr Or Digital Video Recorder - Canon legria hv40 Instruction Manual

Connecting to a TV or VCR
70
- There will be no video or audio output from
the HDMI OUT terminal while there is a video
input connection to the HDV/DV terminal or the
AV/ terminal.
- To output audio dubbed later on a tape
through the HDMI OUT terminal, set [AUDIO
OUT] to [ MIX/VAR.] (
- Audio output from the HDMI OUT terminal will
include both channels (Left/Right on a stereo
recording, Main/Sub on a bilingual recording),
regardless of the [OUTPUT CH] setting.
Recording to a VCR or Digital Video
Recorder
You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device. When recording to a
digital video recorder using the HDV/DV
terminal, you can copy recordings with
virtually no generation loss in video and
sound quality.
Connect the camcorder to the external
device following one of the connection
diagrams shown in the previous section
Connection Diagrams (
Settings for Recording Video Output using the HDV/DV Terminal
Standard of
Video Output
the Recording
Signal
on the Tape
High
Definition
Standard
Definition
* To output video in high definition verify that the DV terminal on the external digital device is
compatible with the MPEG2-TS protocol; to output video in standard definition, verify that it is
compatible with the DV standard.
Downloaded From VideoCamera-Manual.com Manuals
39).
66).
Standard Supported
by the External
Digital Device*
HDV HDV
HDV DV
DV DV
POINTS TO CHECK
Change the following settings as
necessary before making the
connections. Refer to the corresponding
explanation of each setting in the
PLAY/OUT SETUP menu option list
( 38).
- [PLAYBACK STD] to select the output video
standard.
- [DV OUTPUT] to select the standard of the
output video when using connection type
Note that the video standard of the recorded
copy depends also on the standards supported
by the external digital device. Refer to the table
below.
- Set [AV/PHONES] to [
connection type or
4
Connecting
Connect the camcorder to a VCR or other
analog device using connection types
or , or to a DVD recorder or other digital
5
recording device using connection type
as shown in the previous section
,
2
Connection Diagrams (
[PLAYBACK STD]
Setting
[ AUTO] or
[
[ HDV]
[ AUTO] or
[
[ HDV]
[ AUTO] or [
[ DV] [
(
.
2
AV] when using
.
5
4
66).
[DV OUTPUT]
Setting
HDV/DV]
DV LOCKED]
HDV/DV] or
DV LOCKED]
8)