Selecting The Surround Modes; Presetting Automatic Dvd Video Sound Increase Level - JVC DX-T9 Instructions Manual

Selecting the Surround Modes

• For DVD/CD, TAPE-A, TAPE-B, AUX:
SURROUND
ALL CH ST
MODE
MUSIC MOVIE
• For FM/AM:
SURROUND
ALL CH ST
MODE
STEREO
DSP Modes
ALL CH ST All Channel Stereo; Creates larger stereo
sound field using all the connected
speakers (initial setting).
DANCE Increases resonance and bass.
HALL Adds depth and brilliance to the sound.
STADIUM Adds clarity and spreads the sound, as in
an outdoor stadium.
Stereo Mode
STEREO
Cancels the Surround Mode.
Auto Surround Mode
AUTO • When multi-channel surround signal
comes in, multi-channel surround mode
is activated.
• When Dolby Surround signal comes in,
MOVIE (Dolby Pro Logic II Movie)
mode is selected.
• When 2-channel signal comes in,
STEREO mode is selected.
Dolby Pro Logic II Modes
MOVIE
Creates 5.1-channel surround field from
2-ch source (suitable for movie source).
MUSIC
Creates 5.1-channel surround field from
2-ch source (suitable for music source).
14
INFO
DANCE HALL STADIUM
AUTO STEREO
DANCE HALL
STADIUM
To adjust the DSP effect level
When one of the DSP Modes (except for "ALL CH ST") is
selected...
EFFECT 1
EFFECT
• The initial setting is "EFFECT 3."
Presetting Automatic DVD Video
Sound Increase Level
The DVD Video sound is sometimes recorded at a lower
level than other discs and sources. You can set the increase
level for the currently loaded DVD Video, so you do not
have to adjust the volume when you change the source.
DVD LEVEL1
DVD LEVEL
As the number increases, sound level also increases.
• The initial setting is "DVD LEVEL3."
Remote
ONLY
EFFECT 2
EFFECT 3
DVD LEVEL2
DVD LEVEL3