Selecting The Surround Modes; Presetting Automatic Dvd Video; Sound Increase Level; Changing The Picture Tone - JVC CA-DXJ35 Instructions Manual

Selecting the Surround Modes

• For "DVD/CD" and "USB" (multi-channel software):
AUTO
Initial setting: DOLBY D/DTS/PPCM/LPCM*
• For "DVD/CD" and "USB" (stereo software):
Initial setting: ALL CH ST
• For "TUNER AM" and "TUNER FM", "TAPE" and
"AUX":
AUTO
STEREO
Initial setting: ALL CH ST
DSP Modes
ALL CH ST All Channel Stereo; Creates larger stereo
sound field using all the connected speakers.
DANCE Increases resonance and bass.
HALL Adds depth and brilliance to the sound.
STADIUM
Adds clarity and spreads the sound, as in an
outdoor stadium.
Stereo Mode
STEREO Cancels the Surround Mode.
Auto Surround Mode
AUTO The System automatically selects an
appropriate Surround Mode or Stereo Mode
according to the incoming signals. For
example, a multi-channel source is
automatically reproduced in an appropriate
Multi-channel Surround Mode.
Multi channel Surround Modes*
DOLBY D
For multi-channel encoded Dolby Digital
source.
DTS For multi-channel encoded DTS source.
PPCM For multi-channel encoded PPCM (Packed
PCM) source.
LPCM
For multi-channel encoded LPCM (Linear
PCM) source.
Dolby Pro Logic II Modes
MOVIE Creates 5.1-channel surround field from 2-
channel source (suitable for movie source).
MUSIC Creates 5.1-channel surround field from 2-
channel source (suitable for music source).
15
INFO
*
DOLBY D/DTS/PPCM/LPCM
STEREO
1
ALL CH ST DANCE
STADIUM HALL
1
• While one of the Surround Modes is activated,
" " lights up.
1
* Selectable Surround Mode varies depending on the
1
software.
* 2 MOVIE (Dolby Pro Logic II Movie) and MUSIC (Dolby
Pro Logic II Music) cannot be used for DivX file.

Presetting Automatic DVD Video

Sound Increase Level

The DVD Video sound is sometimes recorded at a lower
level than other discs and sources. You can set the increase
level for the currently loaded DVD Video, so you do not
have to adjust the volume when you change the source.
• This function is available only for DVD Video discs.
(while holding...)
• As the number increases, sound level also increases.
• The initial setting is "DVD LEVEL3."
Changing
the Picture Tone
While viewing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1
While playing, display VFP setting screen.
2
Select a preset picture tone.
NORMAL
CINEMA
USER1/USER2
Remote
ONLY
DVD LEVEL1
DVD LEVEL2
DVD LEVEL3
Remote
ONLY
NORMAL
GAMMA 0
0
BRIGHTNESS
CONTRAST 0
0
SATURATION
TINT 0
0
SHARPNESS
On the TV screen
NORMAL CINEMA
USER2 USER1
Normally select this.
Suitable for a movie source.
You can adjust parameters and can
store the settings (see next page).