General Operation; Standby / On; Automatic Power Off Function; Selecting Modes - JVC TH-D131B Instruction Manual

General Operation

Standby / ON

When you first connect the unit to the mains socket, the unit will be in STANDBY mode.
• Press button on the unit or on the remote control to switch the unit on. The display
will show "HELLO".
• Press button on the unit or on the remote control again to switch the unit back to
STANDBY mode. The unit will show GOODBYE and then switch off.
After the unit is idle for about 30 seconds, the display will automatically dim. The display brightness will
return normal once you press any button (excerpt

Automatic Power Off Function

The unit automatically turns to STANDBY mode after about 15 minutes if the TV or
the external unit is disconnected, switched off or the volume is too close to mute.
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.

Selecting Modes

Source button on the unit or remote control repeatedly to select between AUX IN,
Press
BLUETOOTH, OPT (OPTICAL), COA (COAXIAL), ARC (HDMI ARC) and USB mode.

Adjusting the Speaker Level Settings and Effects

Adjusting the Volume
Press +/– button to adjust the volume.
•
• If you wish to turn the sound off, press
display will show "MUTE". Press
remote control to resume normal listening.
Select Equaliser (EQ) Effect
Press the EQ button on the unit or remote control to select your desired preset equaliser
effects: MOVIE / MUSIC / NEWS / SPORT / NIGHT.
Adjusting the Bass/Treble Level in Custom EQ mode
Make sure that the EQ is set to CUSTOM mode.
•
• Press BASS/TREBLE button on the remote control. The display will show BAS 0/TRE 0.
Press +/– button repeatedly to adjust the bass/treble level from BAS–3/TRB–3 to
•
BAS+3/TRB+3.
After about 5 seconds, the unit will exit from BASS/TREBLE setting. The display will
•
show the current selected mode.
You may now press +/– button to adjust volume.
•
16
button).
MUTE button on the remote control. The
MUTE button again, or press +/– on the unit or on the