Playable Disc Types; How To Read This Manual - JVC DX-T9 Instructions Manual

Playable Disc Types

DIGITAL VIDEO
DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
• CD-R/-RW: Recorded in the Audio CD/Video CD/
SVCD formats and MP3/WMA/JPEG files.
• DVD-R: Recorded in the DVD Video format.
• DVD-RW: Recorded in the DVD Video format or the
Video Recording (DVD-VR) format.
• DVD-RAM: Recorded in the Video Recording (DVD-
VR) format.
In addition to the above discs, this System can play back
audio data recorded on CD Text, CD-G (CD Graphics), and
CD-Extra.
• The following discs cannot be played back:
DVD+R, DVD+RW, CD-I (CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage
the speakers.
• In this manual, "file" and "track" are interchangeably used
for MP3/WMA/JPEG operations.
Caution for DualDisc playback:
The Non-DVD side of a "DualDisc" does not comply
with the "Compact Disc Digital Audio" standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
Note on Region Code
This System can play back only DVD Videos whose Region
Code numbers include "1."
EX.:
Audio formats
The System can play back the following digital audio
formats.
• Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "MLP Lossless", and the double-D symbol are trademarks
of Dolby Laboratories.
• "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of
this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
• "CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER."
2
• LPCM (Linear PCM),
INFO
DTS (Digital Theater Systems), MLP (Meridian Lossless
Packing)
IMPORTANT: Before playing a disc, make sure of
the following...
• Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays.
• For disc playback, you can change the initial setting to
your preference. See "Setup Menu Operations" on
page 37.
If " " appears on the TV screen when you press a
button, the disc cannot perform the operation you have
tried to do.

How to Read This Manual

• Button and control operations are explained in the table
below.
• Some related tips and notes are explained later in the
sections "Learning More about This System" and
"Troubleshooting," but not in the same section
explaining the operations (
content has some information).
Indicates that you press the button briefly.
Indicates that you press the button briefly and
repeatedly until an option you want is
selected.
Indicates that you press one of the buttons.
Indicates that you press and hold the button
2
sec.
for a specified period.
The number inside the arrow indicates the
period of press (in the example, 2 seconds).
Indicates that you turn the control toward the
specified direction(s).
Remote
ONLY
Main Unit
ONLY
DIGITAL (Dolby Digital),
indicates that the
INFO
Indicates that this operation is only
possible using the remote control.
Indicates that this operation is only
possible using the main unit.