usi PROMOUNT PLUS 2700 Owner's Manual page 2

USI's New Color-Code Film System
USI Color Codes all of its Roll Film
and Roll Laminators!
We are the only lamination company to offer this unique
trouble-free system. That's right, we are making film loading
even easier. We have completely removed the possibility of
placing the adhesive side of the film down on the machine.
This is a common problem for most laminator users.
That problem will no longer be yours. When it comes
to laminating, USI is here to make the job as easy and
convenient as possible!
Here's how it works:
Your new roll laminator is color coded on the upper and
lower film supply mandrels and machine side housings. All
1" and 2 1/4" roll films are also color coded as well. Simply
match the red core of the film roll to the red end of the
supply mandrel and machine side housing. For the bottom
mandrel, simply match the blue core of the film roll to the
blue end of the supply mandrel and machine side housing.
Now simply thread the film as shown in the manual and
you're ready to laminate with confidence!
Roll Film Rolled Adhesive Side In
Blue Core
Please feel free to call our Technical Department if you
should have any questions about this process.
If it's not color code, it's too hard to load!
Adhesive Side (Dull)
Red Core
USI Corporate Headquarters:
98 Fort Path Road Madison, CT 06443-2264
(203) 245-8586 • (800) 243-4565 • Fax 24 Hour (203) 245-7337
East Coast Distribution Center: Madison, Connecticut
West Coast Distribution Center: Phoenix, Arizona
Color Code helps you easily match up the
correct side of the roll when installing film
onto your roll laminator.
Red Core
Roll Film Rolled Adhesive Side Out
Gloss Side
800-752-9131
Blue Core