Upper Heat Shoe Removal - usi CSL2700 Owner's Manual

UPPEr HEat SHoE rEmoval InStrUctIonS
1. Unplug laminator and allow it to cool to room temperature.
2. remove the left side housing. First remove the thermometer & temperature knob
(shown in figure 16-1). the temperature knob has a small allen head set screw retaining it.
then remove the housing by unscrewing 4 allen head screws. Set housing assembly aside.
3. Unplug the upper heat shoe wires (a) from the terminal block (B). [Figure 16-2]
4. Gently lift the heat shoe and pull forward. Be careful not to damage the wires.
lift from the right side first.
thermometer
temp. Knob
a
Figure 16-1
4
3 2
Figure 16-2
B
1
16