IBM Midrange System DS4000 Series Hardware Manual page 438

Midrange system storage ds4000/ds5000 series

Hide thumbs Also See for Midrange System DS4000 Series:

Table of Contents

With controller firmware Version 07.60.xx, the host types shown in Table 7-2 are recognized.

Table 7-2 Host types

IBM TS SAN VCE

NetWare Failover

Solaris (with Veritas DMP)

Solaris (with or without MPXIO)

Windows 2000/Server 2003/Server 2008

Windows 2000/Server 2003/Server 2008

Clustered (supports DMP)

Windows 2000/Server 2003/Server 2008

Non-Clustered

Windows 2000/Server 2003/Server 2008

Non-Clustered (supports DMP)

Note: There are two host type definitions for Windows 2000/Server 2003/Server 2008

Clustered and Windows 2000/Server 2003/Server 2008 Clustered Non-Clustered. The

entries with the (supports DMP) suffix are only valid if VERITAS DMP is used as the

multipath driver.

There are also scripts available to change the default ADT setting for specific host types. This

might be required for SAN boot to work correctly. See the relevant documentation for usage

instructions in IBM Midrange System Storage Implementation and Best Practices Guide,

IBM Midrange System Storage Hardware Guide