MV Agusta F3 Owner's Manual page 51

High beam flasher button
It is used to attract the attention of other road users in case of danger or emergency. When the high
beam is on, the button is inactive.
SET/OK button
The SET button enables to select the display digits to carry out adjustments, while the OK button ena-
bles to confirm the set digits.
3
Low/high beam button
Under normal conditions, the low beam is on. The high beam can be switched on by pressing the but-
ton when allowed by the traffic and road conditions.
Horn button
It is used to attract the attention of other road users in case of danger or emergency.
Turn indicator switch
It is used to show the riderʼs intention to change direction or lane.
WARNING
Always use your turn indicators correctly. Use them to signal your intention before you
start a turn, and turn them off when you have completed the turn. Failure to observe this
warning could lead other users of the road to draw incorrect conclusions about your inten-
tions and the motion of your motorcycle, resulting in a collision, with subsequent serious
personal injury or even death.
Clutch lever
It engages/disengages the clutch through a hydraulically controlled device.
CONTROLS AND INSTRUMENTS
- 50 -
3