Listening Edit Recording - JVC CA-NXCDR7R Instruction Manual

Listening Edit Recording

Listening Edit Recording allows you to make a program
while listening and checking each track of the loaded discs
(up to 3 discs) in 3-CD Changer, then to start recording the
program.
• You can program up to 32 tracks.
Using the REC MODE button ONLY
On the unit ONLY:
1
Prepare discs in 3-CD Changer.
• If the current playing source is not 3-CD changer,
press CD 3 / 8, then 7. To select a disc, press DISC
repeatedly, then 7.
You can also use the remote control. When using it,
press CD1, CD2, or CD3, then 7.
• If the current play mode is either Program Play or
Random Play, press FM/PLAY MODE on the remote
control to select Continuous Play.
2
Insert a recordable CD-R or CD-RW on the CDR
disc tray.
3
Press REC SPEED (inside the sliding panel) if
necessary.
• Each time you press the button, recording speed
alternates between normal speed and high speed*.
AUTO TRACK
NORMAL
SPEED
CD-RW
UNFINALIZE DISC
REC LEVEL
dB
* For CD-R, 4 times normal speed; for CD-RW, 2 times
normal speed.
When high speed is selected, recording input level is reset
to "0" temporarily, and will not affect the recording.
4
Press REC MODE (inside the sliding panel) to select
"SET=LISTENING?" or "SET=LISTENING &
FINALIZE ?"
• Each time you press the button, recording modes
change as follows:
CD
1 2 3
CD REC? = 1st Tr. REC? = SET=LISTENING? =
CD REC & FINALIZE? = SET=LISTENING & FINALIZE? =
Canceled = (Goes back to the beginning)
• SET=LISTENING ?: Select this to perform
Listening Edit Recording.
• SET=LISTENING & FINALIZE ?: Select this to
automatically finalize the disc after recording.
5
6
7
When you finish checking all tracks or if there is no more
remaining time on the recordable CD-R or CD-RW,
Listening Edit Recording starts automatically.
AUTO TRACK
• If the remaining time of the CD-R or CD-RW becomes
HIGH SPEED
CD-RW
UNFINALIZE DISC
REC LEVEL
dB
To stop during editing process and start recording, press
REC START.
To confirm the recording contents, see "To change the
display information while recording" on page 35.
To stop recording, press 7. "STOP DUBBING" flashes
for a while. (In this case, the disc will not be finalized even
if you have selected "SET=LISTENING & FINALIZE ?"
in step 4.)
AUTO TRACK
CDR
• Both 3-CD Changer and CD Recorder stop
NORMAL
SPEED
CD-RW
REC LEVEL UNFINALIZE DISC
dB
To remove the recorded disc, press 0 CDR.
"FINALIZE ?" flashes in the main display for a while if
you have selected "SET=LISTENING?" in step 4.
• If you do finalize the disc, press FINALIZE.
• If you do not finalize the disc, press 0 CDR again.
Repeat Play will be canceled automatically.
– 39 –
Press SET (inside the sliding panel).
3-CD Changer starts playing.
• Playback starts from the currently selected disc if two
or three discs are loaded.
Decide if you want to include the current track in
the program or to skip it.
• To include the current playing track in the
program, press SET.
The current playing track is programed and the next
track starts playing. (After the last track of a disc is
programed, the first track of the next disc starts
playing.)
• To skip the current playing track, press CANCEL.
The current playing track is not programed and the
next track starts playing.
If you do not press either button while the current
track is playing, 3-CD Changer will skip the track
and play the next track.
Repeat step 6 to program other tracks.
short, CD Recorder will search for a track fitting into the
remaining time. To include the track found in the
program, press SET. To find another, press CANCEL.
automatically.
Remember once you finalize a CD-R, no further
recording can be made on the disc. (For more details, see
"Finalizing a Disc—CD-R/CD-RW" on page 41.)
During Listening Edit Recording