Table of Contents
Advertisement
Notice you cannot use Program Play and Random Play
while playing a disc on CD Recorder.
Playing Back a Disc—Normal Play
You can play back both finalized and unfinalized discs on
CD Recorder.
On the remote control ONLY:
1
Press 0 CDR.
The unit automatically turns on and the CDR disc tray
comes out.
• If the sliding panel is closed, it moves down
automatically before the CDR disc tray comes out.
2
Place a disc correctly on the circle of the disc tray,
with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press CDR 3 / 8.
The CDR disc tray also closes and CD Recorder starts
playing the loaded disc. The CDR lamps start flashing.
• If you press 0 CDR again in this step, the disc tray
closes, but playback does not start.
Track number
1
2
3
Ex.: When an unfinalized CD-RW is loaded
To close the CDR disc tray, press 0 CDR again.
To stop playback for a moment, press CDR 3 / 8.
To resume play, press CDR 3 / 8 again.
To stop during play, press 7.
To remove the disc, press 0 CDR on the unit.
• When you try to eject the unfinalized CD-R or CD-RW,
"FINALIZE ?" appears and flashes in the main display.
If you do not finalize the disc, press 0 CDR again.
If you do finalize the disc, press FINALIZE. (See also
"Finalizing a Disc—CD-R/CD-RW" on page 41.)
Good
No good
CDR
CD-RW
UNFINALIZE DISC
Elapsed playing time
Basic Disc Operations
To locate a particular point in a track during play
On the remote control:
Press and hold ¡ / ¢ or 4 / 1.
On the unit:
Press and hold ¢ or 4.
• ¡ / ¢ (¢): Fast-forwards the tracks.
• 4 / 1 (4): Fast-reverses the tracks.
To go to another track
On the remote control:
Press ¡ / ¢ or 4 / 1 repeatedly.
On the unit:
Press ¢ or 4 repeatedly.
• ¡ / ¢ (¢): Skips to the beginning of the next or
succeeding tracks.
• 4 / 1 (4) : Goes back to the beginning of the
current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Press the number button(s) allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Repeating Tracks—Repeat Play
You can repeat an individual track or all tracks in a disc
many times as you like.
On the remote control ONLY:
Press REPEAT repeatedly during or before playing.
• Each time you press the button, Repeat Play mode
changes and appears in the main display as follows:
1
2
3
REPEAT 1CD
Ex.: When "REPEAT 1CD" is selected
• REPEAT 1CD:
• REPEAT 1:
• REPEAT OFF:
– 30 –
1CD
REPEAT 1
REPEAT OFF
(Canceled)
Repeats all the tracks.
Repeats one track.
Cancels Repeat Play.
CDR
CD-RW
UNFINALIZE DISC
Advertisement
Table of Contents
