Basic Disc Operations; Programing The Playing Order Of The Tracks -Program Play - JVC CA-NXCDR7R Instruction Manual

Basic Disc Operations

To exchange a disc during playback of another disc
On the unit ONLY:
Press the open/close buttons (0 CD1, 0 CD2, or 0 CD3)
to eject a disc not currently playing.
If discs are exchanged during playback, playback will stop
after playing all newly inserted discs.
To start playing a disc during playback of another
disc
On the remote control:
Press CD1, CD2 or CD3.
The selected disc play starts.
On the unit:
Press DISC repeatedly.
Each time you press the button, the next disc is selected
and playback starts.
To locate a particular point in a track during play
On the remote control:
Press and hold ¡ / ¢ or 4 / 1.
On the unit:
Press and hold ¢ or 4.
• ¡ / ¢ (¢): Fast-forwards the tracks.
• 4 / 1 (4): Fast-reverses the tracks.
To go to another track
On the remote control:
Press ¡ / ¢ or 4 / 1 repeatedly.
On the unit:
Press ¢ or 4 repeatedly.
• ¡ / ¢ (¢): Skips to the beginning of the next or
succeeding tracks.
• 4 / 1 (4) : Goes back to the beginning of the
current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Press the number button(s) allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Programing the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Load discs into 3-CD Changer.
• If the current playing source is not 3-CD Changer,
press CD 3 / 8, then 7 before going to the next step.
2
Press FM/PLAY MODE repeatedly so that "CD
PROGRAM" appears in the main display.
The PROGRAM indicator also lights on the display.
CD
1 2 3
• Each time you press the button, play mode changes
as follows:
Program Play
(CD PROGRAM)
3
Press one of the disc number buttons (CD1, CD2,
and CD3) to select the disc number you want to
play.
CD
1 2 3
Disc number
Ex.: Disc number 1 is selected
4
Press the number buttons to select a track from the
disc selected in the above step.
• For how to use the number buttons, see "To go to
another track directly using the number buttons" on
the left column.
CD
1 2 3
Ex.: Track number 5 is selected
– 25 –
NORMAL
PROGRAM
SPEED
REC LEVEL
dB
Random Play
(CD RANDOM)
Continuous Play
Track number
NORMAL
PROGRAM
SPEED
REC LEVEL
dB
Program step number
NORMAL
PROGRAM
SPEED
REC LEVEL
dB