Quick Start Up; Maintenance Procedures - Horizon Fitness Paragon II HRC Owner's Manual

QUICK START UP

Simply press the Start button to begin exercising.
Metric
British
9
M A I N T E N A N C E
Cleanliness of your Horizon Fitness treadmill and its operating environment will keep main-
tenance problems and service calls to a minimum. For this reason, Horizon Fitness recom-
mends that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
T urn off the treadmill with the on/off switch, and unplug the power cord from the wall out-
l e t .
WARNING!
T o remove power from the treadmill, the power cord must be disconnected from the wall
o u t l e t .
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth.
Never use solvents, as they can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it
can become pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt
will not damage any other components on the treadmill by being misaligned.
EVERY WEEK
Clean underneath the treadmill, following these steps:
• T urn off the treadmill with the on/off switch, then unplug the power cord at the wall out
l e t .
• Fold the treadmill into the upright position, making sure that the lock latch is secure.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated unde
neath the treadmill.
• Return the treadmill to its previous position.
EVERY MONTH
• Inspect all assembly bolts of the machine for proper tightness.
EVERY YEAR
• It may be necessary to rewax your treadmill running deck and belt once a year to main
tain optimal performance of your treadmill. Please contact your local dealer with ques
tions about applying wax to your treadmill.
W arning! Only use paraffin wax provided by Horizon Fitness!
• Lubricate the air shocks with teflon based spray.
OMEGA II
TREADMILL SERIES
P R O C E D U R E S
32