Install The Ink Cartridges - Brother MFC-J6920DW Quick Setup Manual

Hide thumbs Also See for MFC-J6920DW:
Table of Contents

Advertisement

3

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Introductory Ink
Cartridges included with your machine first.
a
Make sure that the power is turned on.
NOTE
You can adjust the angle of the control panel by
lifting it. To lower this control panel, push the
release button that is located behind the control
panel, as shown in the illustration.
b
Open the ink cartridge cover a.
c
Remove the orange protective part.
NOTE
Do not throw away the orange protective part.
You will need it if you transport the machine.
d
e
f
1
Lift the scanner cover into the open position.
Store the orange protective part in the holder
inside the machine as shown.
Gently close the scanner cover using the finger
holds on each side.
CAUTION
Be careful not to pinch your fingers when you
close the scanner cover.
Always use the finger holds provided on each side
of the scanner cover when opening and closing it.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents