Install The Ink Cartridges - Brother MFC-J4410DW Quick Start Manual

Hide thumbs Also See for MFC-J4410DW:
Table of Contents

Advertisement

b
Lift the scanner cover until it locks securely into
the open position.
c
Connect the telephone line cord.
Connect one end of the telephone line cord to
the socket of the machine marked LINE.
Carefully guide the telephone line cord into the
cable channel and out the back of the machine.
Connect the other end to a modular wall
socket.
IMPORTANT
The telephone line cord MUST be connected to
the socket of the machine marked LINE.
4
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c using
both hands.
2
4

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Introductory Ink
Cartridges included with your machine first.
a
Make sure that the power is turned on.
NOTE
You can adjust the angle of the control panel by
lifting it. When lowering the control panel, make
sure you push the release button a that is
located behind the mark.
1
3
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j4610dw

Table of Contents