Ipv6 In Ipv4 Tunnel - D-Link AC750 User Manual

Section 3 - Configuration
My IPv6 Connection is: Select IPv6 in IPv4 Tunnel from the drop-down menu.

IPv6 in IPv4 Tunnel

Enter the settings supplied by your Internet provider (ISP).
Settings:
IPv6 DNS Settings: Select either Obtain IPv6 DNS Servers automatically or Use
the following IPv6 DNS Servers
Primary/Secondary Enter the primary and secondary DNS server addresses.
IPv6 DNS Servers:
Enable DHCP-PD: Check this box to enable DHCP prefix delegation.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-Local Displays the router's LAN Link-Local Address.
Address:
Enable Automatic IPv6 Check to enable the Autoconfiguration feature.
Address Assignment:
Enable Automatic Check to enable prefix delegation for routers in your LAN.
DHCP-PD in LAN:
Select SLAAC + RDNSS or SLAAC + Stateless DHCP, or Stateful
Autoconfiguration
DHCPv6.
Type:
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local
Start: computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local
End: computers.
Enter the Router Advertisement Lifetime (in minutes).
Router Advertisement
Lifetime:
Click Save Settings.
D-Link DIR-818LW User Manual
IPv6 in IPv4 Tunnel
67