Ipv6 In Ipv4 Tunnel - D-Link DIR-869 User Manual

Section 4 - Coniguration
The user can conigure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4
tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent
over an IPv4 infrastructure.
Enter the IPv4 remote address you will use.
Remote IPv4
Address:
Enter the IPv6 remote address you will use.
Remote IPv6
Address:
Displays the current local IPv4 address.
Local IPv4
Address:
Enter the IPv6 local address you will use.
Local IPv6
Address:
Enter the subnet preix length supplied by your ISP.
Subnet Preix
Length:
IPv6 DNS Settings
Select either Obtain DNS server address automatically or Use the
DNS Type:
following DNS address.
If Use the following DNS address is selected:
Enter the primary DNS server address.
Primary DNS
Server:
Enter the secondary DNS server address.
Secondary DNS
Server:
D-Link DIR-869 User Manual

IPv6 in IPv4 Tunnel

52