Routing - D-Link AC750 User Manual

Section 3 - Configuration
The Routing option is an advanced method of customizing specific routes of data through your network.
Name: Enter a Name for your data route. Use the check box on
the left to either enable or disable the route.
Destination IP: Enter the IP address of packets that will take this route.
Enter the Netmask of the route, please note that the octets
Netmask:
must match your destination IP address.
Gateway: Enter your next hop Gateway to be taken if this route is
used.
The route Metric is a value from 1 to 15 that indicates the
Metric:
cost of using this route. A value 1 is the lowest cost and
15 is the highest cost.
From the drop-down menu, select the Interface that the
Interface:
IP packet must use to transit out of the router when this
route is used.
Click Save Settings.
D-Link DIR-818LW User Manual

Routing

86