Table of Contents
Advertisement
Optical Parts Disassemblies
⁄1 Optical Parts in the Optical Unit
When the optical parts mounting or assembling in the optical unit, the parts must be mounted in the specified location
and direction as shown in figure below.
- The direction of the printed number on the lens is as
shown in the figure.
- The arrows in the figure indicate the location and di-
rection of the printed number on the parts or the cut-
ting corner of the parts.
Optical Filter
(Spacer)
Condenser Lens
Condenser Lens
Dicroic Mirror(C)
Condenser Lens (In)
403
404
Dicroic Mirror(Y)
- 29 -
zxv⁄0 ⁄ 1
SEQ No.
Relay Lens (In)
Mirror (B-Cold)
Optical Filter
(B)
Mirror (B-Cold)
Relay Lens (In)
Fig.11
Advertisement
Table of Contents
