Display Menu Settings - Handicare TROPHY 20 Service Manual

82 | Service instructions 82 | Service instructions

5.5 Display menu settings

E
G
C
Starting the service menu for ID-no PBxxxxx only
Kilometer total (user)
Reset total (user
R
Kilometer total (scooter)
Hours-on total (scooter)
Battery voltage
Leave dealer menu
Starting the service menu from ID-no QBxxxxx onwards
Pushing the hazard-button (G) together with the claxon-button (E) more than 2 seconds, the service menu shall be visible.
• First information shown after starting the service menu is the "Total km-1"
• Pushing the hazard button again (G) allows you to scroll through the menu shown below.
• If any other button (other than the DSS (I), horn (E), hazard button (G)) is switched during the service menu, the display returns
to the user menu and will show "actual speed"
When the batteries of the scooter are removed the service information shall not get lost for at least 1 year.
The display will blink at a frequency of 1-2HZ, indicating this value can be changed.
1. Total km-1 (S)
The amount of km the scooter has driven after the last time this value was reset.
Resettable by pressing the DSS (I) switch ≥ 2 seconds.
2. Total km-2 (S)
The amount of km the scooter has ever driven in its total life.
3. Actual battery voltage (B)
The actual battery voltage measured real time
4. Hours ON
The amount of hours the scooter has been switched on in its life.
First one character of the display show: H
R S P B R
I
Hold the hazard light button and press the left horn button briefl y
Push the I button (3 sec.)
Hold the hazard light button and press the left horn button briefl y
Hold the hazard light button and press the left horn button briefl y
Hold the hazard light button and press the left horn button briefl y
Any other button
E
Trophy 20