Scooter Settings; Adjusting The Seat - Handicare TROPHY 20 User Manual

14 | Scooter settings

4 Scooter settings

4.1 Adjusting the seat

Adjusting the seat height (fi gure 1)
The entire seat can be adjusted in height in order to
obtain the optimal seating position. This adjustment is
carried out by the dealer.
Adjusting the seat depth (sliding system) (fi gure 2)
(seat may vary from the illustration)
The seat depth can be adjusted as follows:
• Lift and hold handle (A).
• Slide the seat forwards or backwards.
• Release the handle once the seat is in the required
position. Now slide the seat slightly forwards or
backwards so that it locks into place.
• The seat depth has now been adjusted..
Adjusting the backrest (fi gure 3)
The backrest angle can be adjusted as follows:
• Lift handle (A) whilst sitting on the seat. The
backrest now automatically moves forwards.
• Push the backrest to the rear by leaning against
it until it is in the position you fi nd the most
comfortable.
• Once adjusted, release the handle. The backrest
remains in the position you selected.
Warning!
Exercise caution when using the handle when no one
is sitting on the seat. The backrest is equipped with a
spring mechanism which causes it to be driven quickly
forwards with some force.
The backrest can be adjusted to provide good back
support while driving. If the backrest is adjusted to an
angle too far to the rear, the driver's seating position is
then less stable, particularly on slopes. It is therefore
important never to drive your scooter if the backrest is
inclined too far back.
A
B
Figure 1
Figure 2
A
Figure 3
Trophy 20 UM 05
A
Trophy 20 UM 06
Trophy 20 UM 07