Diagnostic Information And Procedures - Suzuki GSX650F Supplementary Service Manual

Hide thumbs Also See for GSX650F:

Service manual (66 pages)

Service manual (697 pages)

Table Of Contents

Table of Contents

1A-2 Engine General Information and Diagnosis:

Dealer Mode

The defective function is memorized in the computer. Use the special tool's coupler to connect to the mode select

switch. The memorized malfunction code is displayed on LCD (DISPLAY) panel. Malfunction means that the ECM

does not receive signal from the devices. These affected devices are indicated in the code form.

CAUTION

Before checking the malfunction code, do not disconnect the ECM coupler.

If the coupler from the ECM is disconnected, the malfunction code memory is erased and the

malfunction code can not be checked.

Special tool

(A): 09930–82720 (Mode select switch)

Malfunction

LCD (display) indication

"NO"

C** code is indicated from small

"YES"

numeral to large one.

Self-Diagnostic Procedures (GSX650FK8)

Use of Mode Select Switch

NOTE

• Do not disconnect coupler from ECM, the

battery cable from the battery, ECM ground

wire harness from the engine or main fuse

before confirming DTC (Diagnostic Trouble

Code) stored in memory. Such

disconnection will erase memorized

information in ECM memory.

• DTC stored in ECM memory can be

checked by the special tool.

• Before checking DTC, read self-diagnosis

function "User mode and dealer mode"

(Refer to "Self-Diagnosis Function

(GSX650FK8) (Page 1A-1)".) carefully to

have good understanding as to what

functions are available and how to use it.

(A)

I717H1110005-01

C00