Installing A Microprocessor - IBM System x3550 Type 7978 Problem Determination And Service Manual

4. Open the microprocessor release lever to the fully-open position.
5. Open the microprocessor bracket frame.
6. Using the vacuum tool that comes with the replacement microprocessor,
7. If you are instructed to return the microprocessor, follow all packaging

Installing a microprocessor

To install a microprocessor, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
138
IBM System x3550 Type 7978 and 1913: Problem Determination and Service Guide
Microprocessor-
release lever
carefully remove the microprocessor.
instructions, and use any packaging materials for shipping that are supplied to
you.
on page 95
Microprocessor
socket dust cover
Microprocessor
orientation indicator
Microprocessor
Microprocessor
orientation indicator
Microprocessor
connector
Vacuum tool
Microprocessor
Alignment
marks
Microprocessor
release lever