Ricoh M018 Service Manual page 197

Engine Maintenance
Vert.Tray2
Horiz.Bypass
Vert.Bypass
Registration
Horiz.Dup.Back
Vert.Dup.Back
Reset Count Resets counters to factory defaults.
Clear Count Clears the Scanner and Jam Counters.
Resets the maintenance counter for the fusing unit.
Replace Fuser This item appears only when the fusing unit life is almost expired or
has expired.
SM Appendix
Adjusts the vertical registration for tray 2. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
Adjusts the horizontal registration for the bypass
tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Adjusts the vertical registration for the bypass
tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
Adjusts the horizontal registration for the back
side in duplex mode. If the machine settings are
reset to the factory defaults, this value does not
change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Adjusts the vertical registration for the back side in
duplex mode. If the machine settings are reset to
the factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
4-5
Service Menu
M018/M019