Ricoh M018 Service Manual page 196

Service Menu
Engine Maintenance
Destination
2nd Transfer
Fuser Temp.
Registration
M018/M019
Sets the destination and updates the engine setting.
JPN/ NA (Default)/ EU/ ASIA/ China
Adjusts the transfer roller current, based on the
2nd Transfer
default value.
Front
[-15 to 15 / 0 (Default) / 1 μA/step]
Adjusts the transfer roller current, based on the
2nd Transfer
default value.
Back
[-15 to 15 / 0 (Default) / 1 μA/step]
Adjusts the temperature of the fusing unit, based
Fuser
on the default value.
Temperature
[-30 to 0 / 0 (Default) / 2°C/step]
Plain Paper (90-105 g/m
Paper (1405-110 g/m
Media Type Thick Paper (Post Card)/ Envelop/ Cardstock/
Bond paper/ Label Paper/ Prepunched/
Preprinted/ Letterhead/ Color/ Recycled
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults,
Horiz. Tray1
this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Adjusts the vertical registration for tray 1. If the
machine settings are reset to the factory defaults,
Vert.Tray1
this value does not change.
[-15 to 15 / 0 (Default) / 0.24 mm/step]
Adjusts the horizontal registration for tray 2. If the
machine settings are reset to the factory defaults,
Horiz.Tray2
this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
2
2
)/ Thin Paper (60-75 g/
4-4
)/ Plain Paper/ Thick
2
)/
SM Appendix